Nikon Prostaff Range Finder: A Big Win in a Small Package

We just got home from our first mini-cruise of the year; this one to the south sound area of Hartstine Island. It was a ‘win’ all around, but one of the stars of our reality was our super little Prostaff Range finder made by Nikon. This was a Christmas gift to Mike last year from my mother, but I may have had something to do with whispering in Santa mom’s ear that this would be a good addition to our small  tools aboard Galapagos.

Ours is a rebuilt unit, which works great and cost less.

This was our first trip of the season and we wanted to play with all of our new toys before we actually needed them so we made a little guessing game about distances over the water. You know what? What they say about distances over the water is true: it’s weird how much further away things are than you think they are. Really! It is so very true that Mike did a couple of tests of the validity of this unit by using the GPS aboard to measure distance, then using the range finder to see if the results were the same. And they were. I offered to use the 100ft tape measure we have to be double dog sure of its accuracy, but Mike just looked at me. I’m so analog to his digital sometimes.

Our first anchorage was Rosedale, close to Gig Harbor. Rosedale is a very protected anchorage and this is where you should go if you want to look at houses. Seriously. There isn’t a spec of shoreline to anchor off without a big honking house plopped down on it. So I hope they enjoyed the view of Galapagos for a couple of days. We like looking at houses, but we’re not really fans of being in people’s back yards. Still, we dropped the hook in quiet water, surrounded by private docks, and whipped out the little Prostaff just for fun. How far is that private dock from our private boat?

Sure, it’s obviously far enough. But how far is it, really? What’s your guess? That dock in the middle was our target.

The Prostaff is dead easy to use. Just hold it to your eye, put your target in the crosshairs, and push a little button on top of the unit. That’s all there is to it. Just one button. Just one push. Maybe two if you want to be extra sure. Compare this ease of use to the new automatic fog horn Mike just installed. It automatically blows the fog horn every set number of seconds, which is nice.  It came with our GPS unit. I made the mistake of asking how to use the foghorn function. Apparently it involves pushing a button a number of times, reading tiny print on the screen, and then doing some kind of heavy scrolling action down a menu written for ants. I don’t know. I fell asleep during the scrolling down part. I’ll need written instructions for that one. Good thing we have those little cans of fog horn noise on board, too. In a pinch, I can just reach for one of those.  Give me one button to push and I’ll push it. Just one.

Hold it to your eye. Site your target. Push one easy button. Read the number. Done.

The answer to our quiz? The closest private dock was 162 yards from our boat. Whaaattt? That was way further than we guessed. We double and triple checked, which is easy enough to do since you only have to PUSH ONE BUTTON! In the second photo of this post, that dock is our target and that dock is 162 yards from the boat. That is over 1.5 times the distance of the playing field in football.

Here’s what having this little unit on board has done for my anxiety about being too close to things:

aok

How much anxiety? Zero. Nada.

Now, maybe you don’t want to spend the money on one of these little gizmos. No worries because we’ve got you covered with a cheap and easy old-school way to make one, which I just discovered while going through some of our old sailing books during this trip. In this case Crusing World’s Workbench:

I’ll just let them do the talking. They ‘splain it better than me anyhow. Warning: Involves math. Now do you want to just buy the digital version?

After we got settled I plopped the dinghy into the water to dinghy out to this sailboat anchored at the other end of the bay. I thought I recognized her from when we were boat shopping years before and I was right. She is a beautiful Spencer 1330 named Athena. Had she been in our price range, she would have been a serious contender for us. She is absolutely beautiful and I’ll bet she sails like a dream.

Narrower of beam than our boat, and without the full keel, she still represents a seriously great blue water cruiser. And guess what! She is still for sale. I can’t imagine why, but she’s listed on Craigslist and Yachtworld.   She has almost everything Galapagos has, including a new Beta Marine engine, PLUS a double walled Airex hull, which I seriously wish we had. If you know someone in the market for a boat in this price range, turn them on to this boat. We took a good long look at her from the outside and took a number of photos. We liked what we saw. Just beautiful.

Athena, a Spencer 1330, sitting in Rosedale harbor.

 

Rumpus Room Media Center

In previous posts we have reported on our progress in updating the V-berth.  With a new cushion and upholstery, the space is really comfortable and has become like a second salon.  We will use the V-berth as a guest cabin when company is aboard but when it is just the two of us, we call this the space the Rumpus Room.

Patrick chillin in the Rumpus Room

Patrick chillin in the Rumpus Room

One of the more decadent projects I have been planning is to have a TV and DVD player on the boat.  We watch more movies on the boat than we ever do at home and it is has become a bit of a ritual to save up a season of some show to binge watch when we are out on a cruise.  For example, we have season six of Downton Abbey unopened and ready for our Memorial Day South sound trip.

In the past, we have used a laptop to watch movies which is okay but not optimal.  The speakers aren’t too great and since the battery life on our laptops is pathetic, we have to plug in to the inverter to keep the juice flowing.  It works but the whole setup seemed a little cheesy.

So, for some time I have been ruminating on how I would install a small entertainment center on the boat.  With the Rumpus Room all but complete, now seemed like a good time to stop thinking and start installing. Alas, as with every other boat project, installing one thing means you must drill, move, re organize and generally tear the boat apart, twice.

One of the most important criteria for designing this  system was to have it be entirely powered from the 12 volt system.  There are a few small TV and TV/DVD combos which are set up for 12 volt. Long Haul truckers use them and there are some marine grade systems as well.  But the units I found seemed really expensive relative to their size.

So last year (I ruminate a long time) I was looking at a TV or computer monitor and noticed that it had an AC to DC power supply (commonly referred to as a brick).  So, just like your laptop, you plug the brick into an AC outlet but the TV is actually running on DC. However just because the TV uses DC does not mean it will work with the 12 volt system on your boat but the seed was planted and more research ensued.

Finally, after a bit of googling, I went to Best Buy and looked at the smaller Insignia brand LED TVs.  Most of these use a AC to DC power supply and one, the Insignia 24 inch LED TV.  actually uses 12 volts.  Be aware that Best Buy sells a few 24 inch TVs in this size and brand.  This model was the only one I found in the store that used a 12 volt power supply. If you want to attract attention at Best Buy, start moving their TVs around and unplugging the power supplies so you can read the voltage and current values for the output. Also it is quite fun to try and explain a project like this to someone that is not entirely sure that TVs even use electricity.

With a TV secured, I also wanted a DVD player that could also run off the 12 Volt system.  This was quite a bit easier since the players are small and I could look at the power supplies without too much trouble.  I ended up buying a Sony BDP-S3700 for $80.  You can buy a cheaper DVD player that will work well on 12volts for about half the price but this unit is WiFi capable.  At home, the only TV we ever watch is via NetFlix or Amazon. I doubt we will be doing much streaming of video away from the marina but we might stream from a networked hard drive at some point.

I wanted to mount the TV on the bulkhead both to keep it out of the way and to improve the viewing angle.  For this task, I bought the $40 Rocket Fish Full Motion TV mount.

DSCN1566

The Rocket Fish Full Motion TV mount

I was and still am a bit worried about the security of this mount and will continue to monitor this.  The TV only weighs 6 pounds but in a bouncy sea way the stress could be higher than the attachment points were designed to stand.  I will also install a bungy cord to hold the TV snugly against the bulkhead when not in use.

So, with the main components secured, I still needed to run wiring to the bulkhead and create outlets for the the TV and DVD player.  That’s where tearing the boat apart comes in.  I ran 30 feet of 12 gauge marine wire through the forward head, salon, galley and into the DC distribution panel.

DSCN1569

I hate drilling holes anywhere on the boat. These two are out of the way.

DSCN1574

Dual 12 volt outlets from West Marine.  I soldered all connections.  I just feel better soldering.

Whenever I run new wire or hose in the boat, I like to label it at a few locations along the run.

Whenever I run new wire or hose in the boat, I like to label it at a few locations along the run.

Probably the moment of truth to this whole project is when I cut the DC connector off of the bricks for the TV and DVD player.  You are committed when you willfully destroy part of the equipment you just paid good money for.  I could have bought adapters for each of the electronics and made new wiring harnesses for them but I don’t intend to use the TV anywhere but on the boat.  I did keep the bricks and could always splice the wires back together.

After cutting the wires and checking the polarity three times, I soldered the the wires onto the fused DC Accessory plugs I picked up for the purpose.  And Finally the moment of truth.

DSCN1587

I have Open CPN on my laptop and it displayed beautifully on the TV. I could see using this display for planning a day’s journey with Melissa.

Both units worked perfectly!  After a little fussing, I was even able to stream Netflx with the DVD player. The audio quality is quite good for such an inexpensive TV and the Rocket Fish mount makes it easy adjust  the viewing angle.  I think that will be particularly important if we use the TV as a computer monitor.

With the Wifi enabled DVD player, we can stream Netflix if a signal can be found. Foss Harbor marina recently added a really nice Wifi system to our dock and it worked beautifully.

With the WiFi enabled DVD player, we can stream Netflix if a signal can be found. Foss Harbor marina recently added a really nice WiFi system to our dock and it worked beautifully.

The power supplies that came with the TV and DVD player both had an open voltage of about 15.5 volts DC, well over the charging voltage that any of the charging sources on Galapagos provide. Still I will probably just unplug these devices when not in use to be on the safe side.  A low voltage condition might cause problems as well and I will have to monitor that as we go.

So far, I am quite pleased with how well this project turned out.  I love not having to turn on the inverter and trying to make the tinny laptop speakers loud enough.  All in all, a nice addition to our Rumpus Room.

 

Put the ‘Fun’ in Functional Storage with this Cheap Trick

I was complaining of being bored the other day. We won’t be moving aboard until at least the end of the summer, and we don’t get to have a long cruise this year because of Mike’s work. That pesky annual leave thing is going to be a thing of the past soon enough, so we’re content to wait out the remaining months doing a little bit here and there to move forward with our plan. The house and yard are in maintenance mode, my practice continues to slowly wind down. I’m fine with living in the liminal space, as a rule. But finding myself kind of wandering aimlessly around the house trying to look busy just isn’t my style.  It’s like don’t know what to do with myself. I decided I needed a few small but useful projects for the boat, starting with that cool cockpit mat.cockpitmat

The rumpus room in the v berth is taking shape and we will be using this cabin to watch movies and TV shows we like. To move forward with that plan,  I sorted and stored our DVD collection, throwing out all the colorful plastic containers and storing each DVD in its own plastic sleeve. I then labeled and stored them in nifty snap-locking containers I bought at JoAnn Fabric for 8$ apiece. I know many cruisers store hundreds of movies on thumb drives and maybe that will be in our future. For now, I don’t have the patience for that. This was quick and easy and finding what we want will also be quick and easy.

Our midship cabin got refurbished, too, with the addition of a layer of latex to the foam, and new upholstery.

You’ll be glad to know that the aft cabin project is moving along. We took possession of the finished mattresses this week and I carted them down to the boat to see that they fit before getting them covered. It’s probably overkill, but since I didn’t have any old foam to take in to use as patterns ( I had made my own paper pattern) I just wanted to eyeball the fit before covering. They fit beautifully and allow us to sleep any old which way. The bed is going to be very comfortable and will last for 20 years if we protect them. The next task is to bring them home so I can cover them in that PUL fabric, then take them for their final upholstery. After that, I get to make custom covers and sheets. Won’t that be a creative undertaking! I do believe our goal of having a totally comfortable, sleepable aft cabin is coming to fruition.

So much nicer than what we had before!

The trusty Brother sewing machine has been dusted off and I am rediscovering my love of sewing. As we are now envisioning being able to live with that aft cabin, it was time to turn my thoughts to how we would store our clothing there. We have one hanging locker, a small set of drawers, and a small drawer under each side of the bunk. There are shelves along the hull on each side and I’d like to keep them uncluttered. I would like to keep both clothing and bedding in that cabin and I wanted that storage to be easy to access because otherwise I am tempted to leave my clothes laying around draped decoratively on doorknobs and corners of objects. I know it’s a long shot, but we both really want to keep a neat and tidy look in our boat. It just feels better that way.

Cuteness overload!

Cuteness overload!

I had been considering colorful soft sided baskets to keep clothing in but where to put them was in question. Instead I opted to make fabric bags that look like pillow shams of different sizes and shapes. I bought 1.5 yards of this super cute owl outdoor fabric on sale for 12$/yard.  Then I found a 3$ remnant of orange fabric that matched. I purchased thread, some velcro, and a set of nylon upholstery zippers.  Total cost for materials was about 40$. For that price, plus some fun time at the sewing machine, I have a selection of sizes of storage containers for soft things like bedding and clothing: 2 large for blankets and such, two standard sized bolsters for shorts, tops, bathing suits, and three additional sizes – 7 storage units in all. These can be stored right in sight on the beds as pillows. The fabric is water repellant and UV protected. Plus…owls! Seriously, you can fit a ton of stuff in these things. Functional, practical, and fun!

The largest bag is 15″ x 26″, for scale purposes.

Mike is working on a couple of interior projects that he will write about soon. Our next joint project will be putting shelving in most, if not all, of the hanging lockers. We have a generous amount of hanging locker space, most of which is completely wasted because we don’t have that many clothes that hang. We already know that this job is going to be a pain in the hind end, so if you have any shortcut tips on how to make it easier, do tell. We want the shelves to take full advantage of all space, so that means they will have have to be custom cut.

This currently holds two blankets and two pillows. It would work great in the forward cabin as an extra pillow for lounging.

Oh, and guess what! We get to go on a short cruise over the Memorial Day weekend. We’ve got friends to stay with Skippy, so Thursday night we are out of here! Yay! We are both so ready for that.