Monthly Archives: June 2013

If you can’t be handsome, be handy

Posted on by

Without a access to a boat upon which to lavish my mad maintenance skills, I have been  knocking out the repair projects at home with alacrity. In the last two weeks I have replaced two of the original doors that had been molested by our dogs over the years and were looking pretty shabby.

Ladies and Gentlemen, The Doors.

Ladies and Gentlemen, The Doors.

This triumph comes close on the heels of my tiny bathroom toilet and molding update, wherein I replaced a 1964 25 gallon per flush American Standard pink toilet with an Earth loving 1.6 gallon dual flush unit.

As a recovering Southern Baptist, I believe that idle hands truly are the Devil’s workshop. Without a boat to potter about on, I could easily resort to loitering on some street corner with a pack of Lucky Strikes rolled into my T-Shirt sleeve, hassling passers-by. For this reason I am grateful that we live in a house that seems to be falling down around our ears. There is never a day that we can’t pitch our eyes in any direction and find a construction, gardening, livestock or automobile project upon which we may toil.

 

Melissa herding a wayfaring duck.Why he waddled into our yard, we do not know. We do not need, nor do we want another animal to care for.

Melissa herding a wayfaring duck.Why he waddled into our yard, we do not know. We do not need, nor do we want another animal to care for.

Imagine my joy then, when Melissa opened the door to the microwave oven and the handle came off in her hand. Five years earlier, I had repaired the handle with West Systems epoxy after a similar event. I continue to be impressed by how useful epoxy can be. At the time I was building our rowing pram Puddler and, as the saying goes, when all you have is a hammer, every problem is a nail.

This time, the handle seemed to be beyond repair. Besides, I had fixed it with epoxy once. What’s the fun in fixing stuff the same way over and over again? I briefly considered buying a new handle but was quickly dissuaded from this plan when I saw the price. $78 dollars for a handle to a 15  year old microwave? That, gentle reader, is not how I roll.

After the obligatory visit to Lowes where I stared dumbly at various doodads for an hour, I flashed on a solution. Melissa had salvaged some old teak (or maybe mahogany) from the marina gate about a year ago and we had some pewter cabinet handles kicking around the garage. I could post date the sleek, black microwave with wood and pewter and save a few bucks at the same time

Above, a bit of salvaged mahogany and two drawer pulls we had kicking around. The old handle is below. the broken piece had been mended with West Systems Epoxy for five years before failing. A replacement handle was $80 dollars!

Above, a bit of salvaged mahogany and two drawer pulls we had kicking around.
The old handle is below. the broken piece had been mended with West Systems Epoxy for five years before failing. A replacement handle was $80 dollars!

So, long story slightly less long, I give you our new, kicky microwave door handles.

Not found in any store

Not found in any store

I sure hope Moonrise sells soon. I don’t know how much longer I can keep up this level of handy-manliness.

How I’m Going to Spend My Summer Vacation! I Mean It!

Posted on by

In naming this post, I’ve thrown down the gauntlet; drawn the proverbial line in the sand between us and the Universe.  It began when I realized two things: we haven’t had a really long sailing vacation since 2010, and we never get to use our boat since we moved it down to Olympia. We’ve had such lovely warm days here of late, and there has even been a bit of wind. We eat dinner on the patio, overlooking the pond and garden and watching the koi spawn. This is lovely. The garden is amazing this year and watching koi spawn is a lot more interesting than some things I can think of.  But sometimes we’d both rather be on the boat, eating dinner in the cockpit.

The koi are spawning early this year and the shallow end of the pond is covered with eggs. The koi will probably eat them all. Got to love an animal that eats its own young without even regretting it.

The koi are spawning early this year and the shallow end of the pond is covered with eggs. The koi will probably eat them all. Got to love an animal that eats its own young without even regretting it.

Just as I was about to get lulled into a nice, deep complacent lack of giving a c**p about boats and plans; just as I was about to throw caution to the wind and stop caring about any of this stuff because it’s just too much out of my control anyhow,  these two simple facts converged in such a way that I began to panic. I feared another summer would go by without a really good sailing vacation. I thought about the coming winter. (We Pacific Northwesterners always start thinking about winter just about the time the Summer Solstice comes around. It’s our way of pre-grieving the loss of the sun.) I thought about things like ‘carpe diem’, and other ubiquitous sayings that mean you should stop what you are doing now and go sailing. And I was seriously not amused at the idea of owning a boat without being able to use it, even if that boat is for sale. I felt my temper rising, just a little bit.

I have NEVER had waterlilies bloom before August. I have three in bloom this year already.

I have NEVER had waterlilies bloom before August. I have three in bloom this year already.

So I made a suggestion. It was really more in the form of a pronouncement, as my dander was up with frustration, but still, it was well thought out: If Moonrise does not sell by the end of June, we are retrieving our boat from Olympia, getting her ready to go, and heading back out to the west coast of Vancouver Island. I want to remember what the big ocean looks like and feels like, and that’s about as far as we can reasonably go in the amount of time Mike has.  I need to remember why we are doing this because it’s been such a frustrating experience so far. We’re not even to square one and already we are behind schedule.  I know that if I get out there and see even one whale, I’ll remember.

This was 3 years ago. That's too long between good, long trips.

This was 3 years ago. That’s too long between good, long trips.

We also need to practice doing things like charting, setting way points, paying more acute attention to weather, and keeping watch. We don’t need these skills very often around here as we’ve been sailing here for 10 years and we pretty much go to all the same places most of the time due to time pressures.  If you don’t have much time, you don’t go very far in a sailboat. So this kind of trip would allow us to get offshore, even if not for long. There will only be the two of us on the boat for this trip, unlike our previous trip to the west coast when our son, Andrew, was with us. He is good crew.

Also this cave almost ate me the last time we were there. I probably should go back and have a little conversation with it, just to clear the space between us.

Also this cave almost ate me the last time we were there. I probably should go back and have a little conversation with it, just to clear the space between us. It’s bigger than it looks. And darker. Much darker. 

Now that I’ve begun planning for our trip, the gauntlet is thrown, the die is cast. Now that the decision has been made, it wouldn’t surprise me if we get a last minute buyer for Moonrise.  If that happens, we’ll have to cancel the trip. But then we can spend our time looking at boats for real.  And that will be just as much fun.

Just in case the Universe is unclear about the plan, if our boat doesn’t find a good buyer before the end of the month, we’re going here. Let it be written, let it be done.

 

 

Alado Furler: Good Stuff for Good Old Boats

Posted on by

When we first bought Moonrise, she had hank on foresails. Hank on sails are simple  and very reliable but even with our Catalina 27 we had a few anxious moments when there was too much wind and sea motion to feel safe leaving the cockpit to wrestle down our big genoa. Therefore, a roller furler was practically the first thing I did to Moonrise to make her ours. Melissa and I both feel that this single piece of gear is one of the best investments we ever made.

Honey, can you swap the head sail?

Honey, can you swap the head sail?

When I was researching furling units I wanted a furler I could install myself but I was not too keen on ascending the mast. Many furling units require that someone go aloft and lower the forestay so that the foil and top swivel can be installed. I have climbing gear now and so ascending the mast is not such a scary proposition. But when we first bought the boat, all we had was a bosun’s chair and Melissa grinding away on a Barient 21 winch. I trust the woman with my life, but only figuratively and not while I’m dangling from a halyard of unknown age and condition.

So it was with some excitement that I began to research the Alado Furlers. Alado, a Brazilian company, doesn’t seem to have the same big marketing budgets as Harken or Pro Furl. They advertise in our favorite sailing magazine, Good Old Boat, so you may be forgiven if you have never heard of them. Alado builds their furlers out of aluminum and they are hell for stout. The foil is not some flimsy plastic extrusion; rather, they are beautiful, anodized aluminum interlocking extrusions that offer two feeders for sails. Yes, you can run two headsails in a dihedral formation from this furler.

The cross section of the A4 size foil extrusion. the two sides interlock around the head stay, allowing for installation at deck level. Note the two feeds for luff tape.

The cross section of the A4 size foil extrusion. the two sides interlock around the head stay, allowing for installation at deck level. Note the two feeds for luff tape.

What sealed the deal for me was that Practical Sailor reviewed a number of furling units and the Alado unit was favorably mentioned. If you already subscribe to Practical Sailor, you can read the article here.

Our Alado Furler, ready for duty

Our Alado Furler, ready for duty

Finally, the price of the Alado Furlers was well below the major brands in the U.S. In early 2009, I paid around $1400 for a somewhat over-sized unit. The same furler today is priced at $1720, still a very good value.

The installation process consists of installing the upper sheaves and the foil extrusions onto the forestay. The foil extrusions are five feet long and easily mate together so the entire foil is assembled on the deck and pushed up the forestay. A spare halyard is used to haul the foil up the stay using a rolling hitch. Care has to be taken that the foil pieces cannot slide off your forestay before installing the drum. These are beefy chunks of metal which act as a torque tube to the upper sheaves. Seeing one slip over the side of your boat would ruin your day.

After assembling and raising the foil sections, you must secure the mast using a spare halyard and then remove the forestay from the deck fitting. Now, Installation of the drum and delrin bearing is completed by sliding these pieces up the forestay and adjusting as necessary to allow for clearance of your anchor. After the forestay is re-attached and tensioned, the foil can be lowered onto the drum and tightened. Haul up your sail and go sailing! I estimate the total install time was about three hours by myself.

The only issue I have with the Alado design is how to handle the jib halyard. If you wish to keep a fully functioning halyard at the furler, you will have perhaps 50 feet of line that you must secure so that it does not interfere with the rest of your sailing activities. Rather than keep 50 feet of line, I cut the halyard short enough to tension the luff and tie it off. When I need to drop the sail, I tie on a spare sheet with a sheep’s bend and then bring the sail down. After I have finished my work on the sail, I haul it back up and retension as normal. As I mentioned earlier, Two sails can be hoisted simultaneously with the Alado. I don’t know what one would do with all the extra line that this would create if you wanted to maintain two fully functioning halyards. The use of small diameter, low stretch lines would probably be the best way to go.

Cast Aluminum furling drum. Note the two eyes for two jib halyards.

Cast Aluminum furling drum. Note the two eyes for two jib halyards.

The drum of the Alado units are larger than many of the drums I have seen from Harken and Profurl. This is extra weight, true, but it is also extra mechanical advantage when rolling up a big sail in a blow. We have had occasion to run our big genoa partially furled and, as you might expect, the sail shape is not so great. Still, it beats being severely overpowered or in danger of a broach.

Melissa and I have been more than pleased with the Alado and I would gladly buy another one for our next boat if it does not already have a furler. As we outfit our next boat for blue water, I want products that are this simple to install and maintain.

If you are in the market for a furling unit, visit the Alado.com site and check them out. If you have an Alado, comment below and tell us about your experience with this bit of hardware.